ATTENTION:
BEFORE
MAKING ANY ITEM MAKE SURE TO USE ONLY APPROVED MARKERS. FOR DARK CLOTHING
REQUEST A WHITE MARKING PEN FROM THE SUPPLY OFFICER.
MALE
All-weather
coat (Raincoat): Inside on lining, 3
inches below collar seam and inside of outer shell on manufacturer's tag.
Belts: Inside, near clip.
Covers:
Navy/Command
(ball cap): Initials and last four digits of social
security number on sweatband.'
Watch cap (knit): Initial and last four digits of social security number
on inside label.
White hat: In back of
brim. When brim is turned down, next to
seam between brim and crown, so
that marking will not show
when brim is turned up.
Coveralls: On waistband inside front at
the right centerline.
Gloves:
Initials on inside only, near the cuff. Jackets:
Blue working: On inside of hem at right of
center line on back.
Also your last name must be
embroidered in white directly on the fabric of the jacket or on a sewed-on name
tape on the right breast three inches above a straight horizontal (imaginary)
line connecting the armpits of the jacket.
Jumpers (blue or white): Turn jumper inside out, front down, collar away from
you, stencil your three initials, 1/4 inch below collar seam to left of
center, and last four digits of your social security number 1/4 inch below
collar seam to right of center; f11l in
manufacturer's tag, using indelible
ink pen.
Neckerchief: Diagonally across center, initials only.
Peacoat: Last name,
initials, and last four digits of social security
number on left side of tail lining, three inches from and
parallel to bottom edge.
Sea (duffel)
bag: Along short strap on outer side,
and on opposite
side from carrying strap, centered,
one foot from top.
Shirts: Vertically, beginning 1 inch from bottom on inner
side of right front fold on which buttons are sewn. Blue utility shirts must
also be embroidered with your last name (only) on right
front, 1/4 inch above the pocket.
Shoes: Initials only, inside, near top. Socks: Initials only
on foot.
Towel: As the towel is laid out for inspection, the marking
should
appear on the
comer to your right, on the hem, parallel to end.
Trousers:
Blue (bell-bottomed; worn with
jumper): Turn trousers inside out, fly down, waistband away
from you. Stencil three initials and last four digits of social security number
on rear pocket, 1/4 inch below horizontal seam using white ink; f11l in
manufacturer's label using indelible ink.
Blue (straight-legged): On
designated nameplate.
Utility: On front
inside waistband, at right of center line; last name
only,
embroidered on outside, 1/4 inch above right hip pocket.
White: Turn
trousers inside out, fly down, waistband away from you, and stencil three
initials and last four digits of social security number on left rear pocket in
between the two horizontal seams; also fi1l in manufacturer's label using
indelible ink.
Undershirt: On outside of front, 1 inch from the bottom of the
shirt
and at right
of center.
Undershorts: On outside
of right half of waistband, or immediately
underneath
waistband on undershorts with elastic waistbands.
FEMALE
Anklets: On foot, initials only.
All-weather
coat (Raincoat): Inside on lining, 3
inches below collar
seam
and inside of outer shell on
manufacturer's tag.
Belts: Inside, near clip.
Brassiere: Initials only on the inside back strap.
Covers:
Combination: On
designated nameplate. Cap cover should be
stenciled on center back, inside band.
Navy/Command
(ball cap): Initials and last four digits of social
security number on sweatband.
Watch cap
(knit): Initial and last four digits of social security number
on inside label.
Gloves: Initials only, near the cuff.
Handbag: On designated nameplate.
Hosiery: Initials only, near the top.
Jacket:
Black
Jacket: Inside hem at right of centerline on the back.
Blue working: On inside of hem at right of center line on back. Also
your last name must be embroidered in white directly on the fabric of the
jacket or on a sewed-on name tape on the right breast three inches above a
straight horizontal (imaginary) line connecting the armpits of the jacket.
Jumpers: Turn jumper inside out, front down, collar away from
you, and stencil three initials, 1/4 inch below collar seam to left of center,
and last four digits of your social security number 1/4 inch below collar seam
to right of center; also fill in manufacturer's tag, using indelible ink pen.
Neckerchief: Diagonally across center, initials only.
Neck tab: Center back; inside.
Peacoat: Last
name, initials, and last four digits of social security
number on left side of tail lining, three inches from and
parallel to bottom edge.
Sea (duffel) bag: Along short strap on outer side, and on opposite
side from carrying strap, centered,
one foot from top.
Shirts: Vertically, beginning 1 inch from bottom on inner side
of right front fold on which buttons are sewn. Blue utility shirts must also be
embroidered with your last name (only) on right front, 1/4 inch above the
pocket.
Shoes:
Initials only, inside, near top.
Skirts:
Blue (belted and unbelted): Initials and last four digits of social security number inside right pocket,
White belted: On name tag
sewn on right pocket.
Slacks:
Blue (belted and unbelted): Initials
and last four digits of social
security number inside right
pocket.
Utility: On inside
waistband in front, at right of center line; last name only, embroidered on the
outside, 1/4 inch above right hip pocket.
White: Initials and last
four digits of social security number on
inside
right front pocket.
Slips:
Center in back below the elastic band; last name and initials
only.
Socks:
Initials only on foot.
Towel:
As the towel is laid out for inspection, the marking should
appear on the comer to your right, on the hem, parallel to
end.
Undershirts: On outside of front, 1 inch from bottom of shirt and at
right of center.
Underpants: Center in back below the elastic band; last name and initials only.
